Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will reduce unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case, it is necessary to buy plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you start working on the glass to ensure that any shards fall onto the cloth instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent water and drafts from entering your property until a professional is able to repair the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. As time passes, they may develop a number of problems, including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges can help fix a window that is sliding. To accomplish this, you'll need open the window to access the frame. With a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close the window and check for an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you are unable to reposition the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loose their elasticity. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's fairly simple to repair a loose upvc window repairs near me handle. First, you'll need close your window and do an initial test fit. The corners of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or not present.

This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking used previously may need to be removed before a fresh layer is applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe situations, you may have to replace the window.

Moldy sills and upvc Window Repairs rotten ones are another sign of water leakage. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open in a breeze It could be the hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part hinges are prone to wear out over time. It's easy to replace a hinge on a window but it's much easier if someone helps hold the frame.

Make sure that the uPVC hinges are closed and open in the correct direction. This can be done by checking for the arrows on each hinge, this indicates which way the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to poor installation at the factory. Sending us photos via our website will often resolve the problem. We are more than happy to provide assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window repairs to operate and close more smoothly. It can also stop corrosion and reduce the possibility of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause a gap to form between the sash and the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may be unbalanced. This is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace the hinges.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking out cold air.

With a little regular maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. However, it is important to recognize that all windows have a life span and they may reach a point where it is more economical to replace them than fix them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.